Artisan Technology Group Quest 210 Specifications download pdf (Page 78)

Glossary

Terms

Agitation

The Quest agitation system consists of a pneumatically actuated Magnet

Bar which vertically oscillates behind the two reaction vessel banks. Small Teflon en-

capsulated magnets are placed in the RV tubes. As the Magnet bar oscillates, the mag-

nets in the reaction vessels vertically oscillate with it, causing mixing to occur.

Agitation Needle Valve

Controls the speed at which the agitator bar will move.

Bulk Head Fitting

The female threaded ports found on the front of the Quest Con-

troller, and on various places of the Quest Reaction Unit.

Bushing

The tan colored threaded fittings

(PEEK)

used for Teflon tubing connec-

tions.

Collection Racks

Holders that can contain up to

test tube into which you can collect

synthesis product.

Controller Unit

This unit contains and

LCD

screen and keypad, through which, agita-

tion and temperature parameters are set and controlled.

Drain Gas

The drain gas port supplies

psi gas line from the Controller Unit to the

Reactor Unit.

Ferrule

The yellow, conical shaped piece which mates to the PEEK bushings. Used

for Teflon tube connections.

Frit

A teflon filter that is installed in the bottom of each reaction vessel.

Heating Block

An aluminum plate mounted behind the reaction vessel banks.

Lower Manifold Drain Valves

This unit mates to the bottom of the reaction vessels.

The drain valves mechanically seal the lower exit paths from the reaction vessels. Each

drain valve has a lever to toggle from the closed or drain positions.

QUEST

210

User

Manual

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 97 98

Comments to this Manuals

No comments

Artisan Technology Group Quest 210 Specifications Page 78

Comments to this Manuals

Related products and manuals for Synthesizer Artisan Technology Group Quest 210