Artisan Technology Group Quest 210 Specifications download pdf (Page 14)

Figure

11.

Quest Controller Unit display

Place a single magnet mixer into each RV with the fin facing downward. Use the

external hand magnet found in the Quest starter kit to align the magnet mixers with

the magnetic agitation bar.

Lower the Upper Manifold onto the RVs by doing the following:

a. Push in the silver buttons on the blue handles of the Upper Manifold.

Using the Upper Manifold handles,

slowly

slide the Upper Manifold onto the tops

of the RVs.

Do not push the male Teflon fittings of the Upper Manifold into

the RVs at this time.

c. Use the Rotating Levers on either side of the Quest to

simultaneously

lock both

sides of the Upper Manifold into place. First move the Levers so they stick out

from the sides of the Quest 210 Reactor Unit parallel to the bench top. Next,

rotate the levers towards the

front of the Quest

10 Reactor Unit. Insert the levers

into the slot in the blue handles of the Upper Manifold. Push down on the

Rotating Levers and slide the Upper Manifold into the RVs. Keep pushing until

the silver buttons on the blue handles snap out indicating that the Upper Manifold

is locked into place.

Replace the Luer Plugs (push and twist) into the Luer Ports of the Upper Manifold.

Changing the

Solvent Bottle

Ensure the Manifold Membrane Pressure Switch is in the "OPEN" position.

Vent the Upper Manifold by turning the Manifold Control Valves to "CLOSED" and

"VENT". Wait

-5

seconds.

Drain Gas Metered Gas

Utility

Vent the 4

Solvent Bottle by turning the black valve on the Solvent Bottle Cap to

the

"VENT"

position and allow the solvent bottle to vent for

-1

minute.

Argonaut Technologies

Part

Number 102298

04/02/98

Quest Tutorial

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

Comments to this Manuals

No comments

Artisan Technology Group Quest 210 Specifications Page 14

Comments to this Manuals

Related products and manuals for Synthesizer Artisan Technology Group Quest 210