Artisan Technology Group Quest 210 Specifications download pdf (Page 7)

Figure

Location of Manifold Controls and Utility Ports

Once the oil bubbler is installed, ensure that it is functioning properly by doing the

following:

Verify the Upper Manifold Membrane Pressure Switch is "OPEN".

Turn the Manifold Control Valves to "UTILITY

and "METERED GAS".

Drain Gas Metered Gas

Utility

The metered gas is regulated by the Metered Gas Needle Valve located next to the

utility ports on the top of the Reactor Unit

(Figure

3).

Turn the Metered Gas Needle

Valve

counter clockwise

to increase the gas flow rate and

clockwise

to decrease the

gas flow rate. Observe the differences in flow rate

via

the oil bubbler.

Flush the common channels of the Upper Manifold using the following protocol:

a. Turn the Manifold Control Valves to "DRAIN GAS" and "CLOSED. Open the

Lower Manifold Drain Valves by pushing the levers down one at a time or by

Argonaut Technologies

Part

Number 102298

04/02/98

Quest Tutorial

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 3 4 5 6 7 8 9 10 11 12 ... 37 38

No comments

Artisan Technology Group Quest 210 Specifications Page 7